Alpina helmet Ximo Disney Winnie the Pooh 47-51 cm

Features:

The back of the helmet is deeply drawn, providing additional protection for smaller heads. The rear part is adapted so that children are not disturbed even when carried in a child seat or trailer and offers them maximum comfort. For optimal visibility and safety, a detachable Multi.Fit Light is installed. The internal mechanism is adjusted using the Run System Classic Slide.

• HI-EPS: The inner mold of the Alpina helmet is made of HI-EPS (expandable polystyrene). This material is composed of microscopic air spaces that effectively absorb the forces that occur upon impact.
• Inmold Tec: In INMOLD helmets, the inner layer is transformed into foam under high pressure and heat and is glued under the outer layer. Since the inner and outer parts are completely connected, INMOLD helmets are extremely stable and very light. In addition, they provide significantly greater safety than point-glued helmets.
• CERAMIC SHELL: the name given to the outer shell of all Alpina helmets made with the Inmold process. It is a thin, light material that is extremely resistant to impacts and scratches, contains UV stabilizers and is antistatic.
• Run System Ergo Flex + - the rotary knob on the back of the head allows easy adjustment of the size of the helmet to the head, thus ensuring perfect adjustment and safety.
• ERGOMATIC: the buckle, which has been tried and tested countless times, is used on all Alpina helmets. Multi-level adjustment that can be controlled with just one hand. Also, the buckle cannot come undone by itself in the event of an accident.
• Y-CLIP: The Y-clip connects the front and back straps under the ears. When the clip is unfastened, it is easy to move the position of the straps and make fine adjustments. This enables an optimal fit of the helmet.
• Helmet weight 210g
• 12 ventilation holes ensure ideal air flow to the interior
• Fly net - protective net against carrion

Fitting the helmet

For optimal protection, please install the helmet according to the following steps:

Place the helmet on the head and open the mechanism for splitting the straps.

Reinstall the straps so that they meet just below the ear. The strap should not cover the ears. Close the strap dividing mechanism.

Place the strap under the chin so that it is both tight and comfortable against the chin. The clasp should not be directly in front of the chin. You can adjust the length of the strap on the buckle. Close the buckle.

Adjust the wheel on the back of the head according to the circumference of the child's head. The helmet must fit tightly and at the same time comfortably to the child's head. To provide optimal protection, the helmet should cover the forehead, not be pushed too far to the back of the head.

Warning

This helmet is intended exclusively for cycling, riding scooters, inline skates, skateboards and scooters. Not suitable for skiing, climbing, horse riding or riding motorcycles. Helmets should not be used by children for climbing or other activities where there is a risk of suffocation or hanging if the child gets stuck in the helmet. For this reason, children should not use helmets on playgrounds and especially not on climbing ladders.