Kinderfusse kinderschuhe merilec +12

Note: the gauge measures up to size 45.

Instructions for use:

1. Measuring the length of the foot

Place the Plus12 on the floor so that the side with the red arrow is on the floor and slightly longer than the length of your foot.

Step on the meter barefoot or wearing thin socks. Slightly squeeze the longest toe and push the red arrow towards it, but not all the way.

Lower your finger backwards and push the red arrowhead towards it.

You can now step off the tape measure and read the length of the foot on the vertical side with the 1.2 cm already added.

2. Shoe length measurement

Shrink the Plus12 a little and insert it into the shoe so that the side with the red arrow is in the shoe. Fix the gauge firmly at the heel and push the vertical side of the gauge down until the red arrow touches the end of the shoe.

3. Is the shoe the right size?

If the measured length of the foot was equal to the measured length of the inside of the shoe, then the shoe is a reasonable size. For example, if you measure a foot length of 180 mm with the Plus12, then the inside length of the shoe should also be 180 mm. The internal length of the shoe can also be slightly longer, but in this case no more than 185 mm.